MacBook Pro (A1989 Model) Screen Replacement Guide

Hello, it’s Simon here. In this tutorial, I’ll be guiding you through replacing the screen of a MacBook Pro 13-inch, model A1989 (2018 or 2019 model). Let’s start by assessing the screen’s condition.

Initial Assessment

• Screen Issues: We have flickering issues, along with distorted and pixelated colors, indicating the need for a screen replacement.

Tools and Preparation

• Essential Tools: Pentalobe screwdriver, T3 and T4 screwdrivers, metal prying tool, plastic prying tool.
• New Screen: Ensure you have the correct replacement screen for your MacBook Pro model.
• Safety Reminder: Work in a well-lit area to ensure you can see small components clearly.

Disassembling the MacBook

1. Removing the Back Cover: Use a Pentalobe screwdriver to remove the six screws holding the back cover. The top two are longer than the bottom four.
2. Opening the Back Cover: Use the metal prying tool to release the clippers on both sides, then slide the cover towards yourself to remove it.
3. Disconnecting the Battery: Locate and remove the plastic cover over the battery connector. Use the plastic prying tool to disconnect the battery.

Removing the Old Screen

1. Removing Screen Components: Carefully remove the screws from the LCD board and disconnect the Wi-Fi antenna and other relevant cables.
2. Handling the Wi-Fi Antenna: Be gentle with the Wi-Fi antenna to avoid damaging it during removal.
3. Removing the Screen Hinges: Use a T8 screwdriver to detach the screen from its hinges.

Installing the New Screen

1. Aligning the New Screen: Ensure the hinges of the new screen are fully open and correctly aligned with the MacBook’s body.
2. Securing the Hinges: Insert and lightly tighten the screws on both sides to keep the new screen in place.
3. Reconnecting Components: Reattach the Wi-Fi antenna, LCD board, and all cables in reverse order of how they were removed.

Reassembling the MacBook

1. Reconnecting the Battery: Carefully reattach the battery connector and secure it with the screw.
2. Closing the Back Cover: Slide the back cover into place, ensuring the clippers lock correctly.
3. Final Screws: Replace all six screws, remembering the longer screws go on top.

Conclusion

Power on your MacBook Pro to ensure the new screen is functioning correctly. You’ve successfully replaced the screen of your MacBook Pro!

If this guide was helpful, please like and subscribe for more tutorials. Leave any questions or comments below, and I’ll be glad to help. Thanks for watching, and see you in the next repair guide!

This script provides a clear, concise guide for viewers looking to replace the screen of their MacBook Pro A1989, including safety tips, the disassembly process, screen replacement steps, and reassembly instructions.