MacBook Pro Mid 2018 Screen Replacement Guide

Introduction

This guide will walk you through replacing a cracked screen on a MacBook Pro Mid 2018 (also applicable for 2019 models, 15-inch). The model in focus is A1990.

Tools Required

• Pentalobe screwdriver
• Pry tool
• T5 Torx screwdriver
• T8 Torx screwdriver

Steps for Screen Replacement

1. Removing the Back Cover:
   • Use a Pentalobe screwdriver to remove the screws (longer screws at the top, shorter at the bottom).
   • Pry open the back cover, starting from the corners.
   • Slide the back cover towards you to remove it.
2. Disconnecting the Battery:
   • Remove the plastic cover over the battery connector.
   • Use a pry tool to open the connector clip and slide the power cable to the left to disconnect the battery.
3. Identifying Key Components:
   • Wi-Fi/Bluetooth Antenna: Located near the top, connected with small screws.
   • LCD Board: Houses connections for the LCD screen.
   • Hinges: Connect the screen to the main body.
4. Removing Wi-Fi Antenna and LCD Board:
   • Remove screws from the Wi-Fi antenna and slide it out gently.
   • Remove screws holding the LCD board and gently move it aside.
5. Removing Hinges:
   • Open the laptop more than 90 degrees.
   • Use a T8 Torx screwdriver to remove the screws from both hinges.
   • Gently remove the screen by lifting and moving the hinges out of the slots.
6. Installing New Screen:
   • Ensure the new screen hinges are open more than 90 degrees.
   • Align and slide the screen’s hinges into the slots on the laptop body.
   • Secure the hinges with screws.
7. Reconnecting Components:
   • Carefully position the LCD board and Wi-Fi antenna back in place.
   • Reconnect all cables and ensure no pinching or misalignment.
   • Secure the components with their respective screws.
8. Reconnecting the Battery and Closing the Laptop:
   • Slide the battery connector back in place and secure the clip.
   • Place the back cover on, slide it to align, and press down to secure the clips.
   • Screw the back cover in place.

Conclusion

Replacing the screen on a MacBook Pro A1990 requires patience and attention to detail. Ensure all connections are secure and components are correctly aligned during reassembly. If you’re uncomfortable performing these steps yourself, consider professional assistance.

Additional Notes

• LCD Screen Purchase: Check the description for links to buy the LCD screen from Amazon or eBay.
• Professional Repair Services: If you’re hesitant to do it yourself, consider sending your device for professional repair. Contact details and more information might be available on the service provider’s website or by direct inquiry.

Remember to take your time and handle each component with care. If you encounter any issues or have questions, feel free to ask for assistance in the comments.