Replace Macbook Pro A1706 and A1708 LCD Screen

Step-by-Step Tutorial: Replacing a Cracked Screen on a MacBook Pro (2017, Models A1706/A1708)

Tools Needed:

• Pentalobe screwdriver
• Torx screwdriver (with a hole in the middle for special screws)
• Pry tool

Steps:

1. Ensure the MacBook is Powered Off:
   • Shut down the MacBook properly.
   • If necessary, remove the battery by unscrewing the backplate for a complete power-off.
2. Remove the Backplate:
   • Remove the six screws on the backplate using a pentalobe screwdriver (two longer screws on the top, four shorter screws at the bottom).
   • Use a pry tool to carefully release the clippers holding the backplate. Start from one side and gently work your way around.
   • Slide the backplate towards you to remove it.
3. Remove the LCD Assembly:
   • Remove six tiny screws on both sides of the LCD assembly.
   • Remove two special Torx screws (with a dimple in the center) located near the laptop’s hinge.
   • If the battery is still connected and has power, disconnect it by removing the relevant screws and connectors for safety.
4. Detach the Screen:
   • Open the MacBook at a 90-degree angle.
   • Remove the final screws holding the screen in place.
   • Gently lift and angle the screen to expose the connector.
   • Disconnect the screen by carefully removing the tape securing the connector and then detaching the connector itself.
5. Install the New Screen:
   • Align the new screen and slide its connector into place. Ensure it’s fully connected.
   • Reattach the tape to secure the connector.
   • Position the screen back onto the MacBook and screw it into place, starting with the hinges.
   • Reconnect any cables that were disconnected during the removal process.
6. Reassemble the MacBook:
   • Reattach any brackets or components removed during the disassembly.
   • Ensure all screws are back in their correct places, paying attention to the varying lengths.
   • Slide the backplate into position and press it down to engage the clippers.
   • Screw the backplate back into place, ensuring the longer screws are at the top and the shorter ones at the bottom.
7. Final Checks:
   • Power on the MacBook to ensure the new screen is functioning correctly.
   • Check for any display issues or loose connections.

Conclusion:

Replacing a MacBook Pro screen is a delicate process that requires careful handling and attention to detail, especially regarding the various screws and connectors. If you’re not comfortable performing these steps, seeking professional help is advisable. Ensure the replacement screen is compatible with your specific MacBook model.