MSI MS17C6 Screen Replacement

MSI Laptop (Model MS-17C6) Screen Replacement Guide

Introduction:

• Model: MSI MS-17C6 (17-inch gaming laptop)
• Issue: Need to replace the laptop’s screen

Tools Needed:

• Prying tool (plastic recommended)
• Phillips screwdriver

Steps for Replacement:

Preparing the Laptop:

1. Shut Down: Ensure the laptop is turned off.
2. Positioning: Open the laptop screen fully.

Removing the Bezel:

1. Identify Separation Line: Locate the line where the bezel meets the back cover.
2. Pry Open: Gently insert the prying tool at a corner and start separating the bezel. The bezel is held by double-sided adhesive.
3. Work Around the Edges: Slowly work around the bezel’s perimeter, being careful not to damage the screen or bezel.

Removing the Screen:

1. Remove Screws: Unscrew the screws at each corner of the screen. There are usually four screws – two on the top and two on the bottom.
2. Gently Lift Screen: Carefully lift the screen away from the laptop.
3. Disconnect Connector: Find the screen connector, usually secured with a plastic or tape. Gently peel off the tape and disconnect the connector.

Installing the New Screen:

1. Prepare New Screen: Take out the new screen and remove any protective coverings.
2. Connect the Screen: Carefully align and connect the new screen to the connector. Secure it with the tape or plastic clip.
3. Place the Screen: Position the screen back into the laptop frame.
4. Screw in the Screen: Replace the screws to secure the screen in place.

Reassembling the Laptop:

1. Replace Bezel: Carefully align the bezel back onto the screen. Press gently around the edges to ensure the adhesive sticks properly.
2. Test the Screen: Before fully pressing down the bezel, power on the laptop to test the new screen.

Tips:

• Handling: Be gentle when removing the bezel and screen to avoid damaging the LCD or connectors.
• Adhesive: Be cautious with the adhesive to prevent it from sticking incorrectly or losing its stickiness.
• Testing: Always test the new screen before finalizing the installation to ensure it’s working correctly.

Conclusion:

Replacing the screen on an MSI MS-17C6 laptop involves careful removal of the bezel and screen, followed by the installation of a new screen and reassembly. It’s a straightforward process but requires attention to detail, especially when handling the screen and adhesive.

Additional Information:

• LCD Model: Look for N173HHE-G32 (or a compatible model) for the replacement screen.
• Purchase Link: Check the description below for a link to buy the screen. Using this link may provide a referral fee to the guide creator.