Title: Upgrading to 64GB DDR5 RAM on Acer Predator Helios 300

Introduction:

Hi, I’m Simon. In this video, I’ll guide you through upgrading your Acer Predator Helios 300 with 64GB DDR5 RAM. This step-by-step tutorial is perfect for anyone looking to boost their laptop’s performance.

Materials Needed:

• DDR5 RAM (2x 32GB).
• Phillips screwdriver.
• Plastic and metal prying tools.

Steps for RAM Upgrade:

1. Disassembly:
   • Use the Phillips screwdriver to remove all 11 screws from the laptop’s back cover. In this model, all screws are the same size, so mixing them is okay.
2. Back Cover Removal:
   • Locate the opening on the side corner.
   • Use the metal prying tool to gently pry open the cover.
   • Switch to a plastic prying tool to avoid scratches or damage.
   • Lift the cover gently and slide it away to avoid damaging the ports.
3. RAM Upgrade Process:
   • Before handling internal components, disconnect the battery by sliding the connector down.
   • Locate the RAM shield and remove the single screw holding it.
   • Gently lift the shield to expose the RAM slots.
   • Install the new DDR5 RAM modules (32GB each) into the slots. Ensure they are aligned correctly and click into place.
   • Reattach the RAM shield and screw it back in place.
   • Reconnect the battery.
4. Back Cover Reassembly:
   • Slide the back cover into place, starting from the top.
   • Make sure all ports are aligned correctly.
   • Press down to secure the cover.
   • Replace all 11 screws.
5. Startup and Configuration:
   • Upon first startup, the laptop might take longer to boot. This delay is normal as the system recognizes and configures the new RAM.
   • The initial boot might take up to 2-3 minutes. Patience is key here.
   • Once the laptop boots up, verify the RAM upgrade by checking the system properties.

Conclusion:

Upgrading your Acer Predator Helios 300 with 64GB DDR5 RAM is a straightforward process that can significantly enhance your laptop’s performance. Remember to work carefully and patiently, especially during the reassembly process.

Additional Tips:

• Keep your workspace organized to avoid losing any screws.
• Handle the RAM modules by their edges to avoid static damage.
• After the upgrade, your laptop will be better equipped for demanding tasks like gaming, video editing, or 3D modeling.

Final Thoughts:

If you found this guide helpful, please give it a like, and consider subscribing for more tech tutorials. For any questions or clarifications, feel free to leave a comment below. Check the description for links to purchase DDR5 RAM and other tools used in this video. Thanks for watching, and see you in the next tutorial!