Title: MacBook Pro A2159 Screen Replacement Guide

Author: Simon

Introduction: Hello, Simon here. Today, I’m going to guide you through a screen replacement for a MacBook Pro, model A2159, which features a Touch Bar. My MacBook Pro’s screen has been damaged with lines across the LCD following an impact, so I’ll demonstrate how to replace the screen step by step.

Procedure:

1. Identify Your Model:
   • Ensure your MacBook Pro model is A2159.
2. Tools Needed:
   • Pentalobe P5 screwdriver.
   • Metal prying tool.
   • T4 Torx screwdriver.
   • T8 Torx screwdriver.
   • Magnetic pad for screws (optional).
3. Removing the Back Plate:
   • Remove all the screws using the Pentalobe P5 screwdriver.
   • Use a metal prying tool to detach the back plate.
   • Slide the back plate down to remove it.
4. Disconnecting the Battery:
   • Peel off the plastic cover over the battery connector.
   • Flip open the black connector and slide out the flex cable.
   • Remove the screw holding the battery using the T4 screwdriver.
5. Dismantling the Screen:
   • Remove screws from the LCD board and the Wi-Fi connector.
   • Lift out the Wi-Fi antenna.
   • Detach the LCD cable.
   • Remove the screws from the hinges using the T8 screwdriver.
   • Open the MacBook more than 90 degrees and slide out the screen.
6. Installing the New Screen:
   • Assuming you have the new screen, open the hinges and align the new screen.
   • Slide in the new screen and replace the hinge screws.
   • Reconnect the LCD cable and Wi-Fi antenna.
   • Reattach the Wi-Fi connector and secure the battery.
7. Reassembling the MacBook:
   • Replace all screws in their respective places.
   • Slide the back plate into position and secure it with screws.
8. Post-Replacement Steps:
   • Plug in the MacBook to power on as the battery was disconnected.
   • Test the new screen to ensure functionality.

Conclusion: Replacing the MacBook Pro screen requires careful handling and attention to detail. Ensure you’re keeping track of all screws and connectors. If you find this guide helpful, please like and subscribe for more tech tutorials. Feel free to leave any questions in the comments below.

Additional Tips:

• Take pictures of your progress to remember the placement of screws.
• Use a magnetic pad to keep screws organized.
• Be gentle with connectors to avoid damage.

Closing: Thank you for watching this tutorial. I hope it helps you successfully replace your MacBook Pro screen. Check the description for links to tools and replacement parts. Until next time, bye now!

Safety Note: Always ensure your MacBook is turned off and disconnected from any power source before attempting repairs. If you’re unsure or uncomfortable with DIY repairs, consider seeking professional assistance.