Step-by-Step Tutorial: Replacing an iPad 6th Generation Screen

Today, I’ll guide you through replacing the screen of an iPad 6th generation (model A1893). This process requires patience and precision, so make sure to follow each step carefully.

Tools Needed:

• Safety goggles
• Heat gun (for softening the adhesive)
• Double-sided adhesive tape
• Pry tool
• Tweezers
• Phillips screwdriver
• Replacement screen
• Adhesive gel

Steps for Replacement:

1. Safety First:
   • Always wear safety goggles to protect your eyes from broken glass.
2. Heating the Screen:
   • Use the heat gun to warm up the edges of the broken screen. This softens the adhesive, making it easier to remove.
3. Prying the Screen:
   • Carefully insert the pry tool between the screen and the iPad frame to cut through the adhesive. Reheat the screen as necessary.
4. Removing the Broken Screen:
   • Gradually work your way around the iPad, carefully lifting the screen. Pay special attention to the area around the home button to avoid damaging its cable.
5. Cleaning Up:
   • Remove any leftover glass shards and adhesive from the iPad frame.
6. Removing the LCD Screen:
   • There are four screws under the LCD screen, hidden behind black tape. Remove the screws and gently lift the LCD screen, being careful not to damage it.
7. Transferring the Home Button:
   • Carefully remove the home button from the old screen and transfer it to the new one. Ensure it’s correctly aligned and clicks when pressed.
   • Secure the home button using adhesive gel and allow it to dry.
8. Preparing the New Screen:
   • Remove protective plastic covers from the new screen. Apply tape over the sensor areas on the new screen to prevent unwanted touch inputs.
9. Reattaching the LCD:
   • Carefully place the LCD screen back into position and secure it with screws.
10. Final Assembly:

• Apply double-sided adhesive tape around the edges of the iPad frame.
• Carefully align the new screen and press it onto the frame, ensuring a firm seal.

Testing and Final Touches:

• Turn on the iPad to test the new screen’s functionality.
• If everything works fine, proceed to secure the screen by applying pressure along the edges.

Conclusion:

Replacing an iPad screen can be challenging but is doable with the right tools and patience. If you’re not comfortable performing these steps, it might be best to seek professional help. Always remember to work slowly and carefully to avoid further damage to your iPad.