Step-by-Step Guide to Replacing Your MacBook Pro Screen (13-inch, 2015 Model)

Replacing a MacBook Pro screen might sound daunting, but with a little patience and the right tools, you can breathe new life into your beloved laptop. Whether you’re dealing with accidental damage or just want to freshen up an aging display, follow this step-by-step tutorial to replace the screen on your 13-inch MacBook Pro (2015 model).

Essential Tools

Before diving in, make sure you have the following tools:

• Pentalobe screwdriver
• Torx T5 screwdriver
• Phillips #00 screwdriver
• Replacement screen (ensure compatibility with your model)

You can find links to purchase these tools in the description of our tutorial video.

Step 1: Remove the Bottom Screws

Place your MacBook upside down and use the pentalobe screwdriver to remove all the screws from the bottom case. Keep these screws in a safe place; you’ll need them for reassembly.

Step 2: Take Off the Backplate

Lift away the backplate to reveal the internal components of your MacBook Pro. You’ll see the motherboard, SSD, and the Wi-Fi/Bluetooth card area.

Step 3: Disconnect the Necessary Cables

Carefully disconnect the Wi-Fi cable and then proceed to the LCD screen connector. This connector has a clip that you’ll need to flip up gently before removing the cable.

Step 4: Remove Additional Components

Take off the plastic covers on the sides to uncover more screws. Then, use the Torx T5 screwdriver to remove the hinge holders. There are tiny screws here, so handle them carefully.

Step 5: Open and Remove the Hinge Screws

Open your MacBook to a 90-degree angle. While holding the base, unscrew the hinges using the Phillips #00 screwdriver. This will free the old screen from the body.

Step 6: Detach the Old Screen

Now you can remove the cracked or damaged screen. Perform this step with care to prevent any damage to the MacBook’s body or internal components.

Step 7: Prepare the New Screen

Before attaching the new screen, ensure that its hinges are positioned at a 90-degree angle. This alignment is crucial for a seamless installation.

Step 8: Attach the New Screen

Carefully align the new screen and screw the hinges back onto the MacBook’s body. Make sure the screen is securely attached.

Step 9: Reconnect Cables and Test

First, reconnect the LCD cable and secure its clip. Then, attach the Wi-Fi cable. Once everything is in place, it’s crucial to test the new screen before finalizing the assembly. Power on your MacBook Pro and check if the screen displays correctly.

Step 10: Final Touches

If the screen is working as expected, turn off the laptop and complete the reassembly. This includes screwing any remaining parts, attaching clips, and putting on the plastic covers.

Step 11: Close It Up

Place the backplate on and screw it down with the pentalobe screws. This is the final step in securing your MacBook Pro after the successful screen replacement.

Conclusion

Congratulations! You’ve just replaced your MacBook Pro screen. It’s a rewarding process that not only saves you the cost of professional repair but also extends the life of your device.

If you encounter any issues or have questions, feel free to drop a comment below. For those who found this guide helpful, give us a thumbs up and consider subscribing for more tech DIY tips and tutorials. Until next time, enjoy your like-new MacBook Pro screen!